TEMPERSAFE
TEMPERED SAFETY GLASS

TEMPERSAFE is produced by heating annealed glass until it reaches a thermal softened level and subsequent quenching by uniform blast of air.

By this process, it obtains 4 - 5 times high loading stress and, therefore, is stronger than normal glass.

Due to this tempering process, TEMPERSAFE can be made into thinner annealed glass in the same applications.

It can be produced up to 7.50 metres of length.

A High Quality Standard Product

Due to its greater strength, TEMPERSAFE is more resistant to breakage caused by rapid temperature changes (thermal shock).

TEMPERSAFE is specially designed for applications requiring additional safety and higher strength.

When an accident occurs, TEMPERSAFE breaks into small pieces which are not sharp like normal glass.

Consequently, TEMPERSAFE helps reduce the risk of serious injury.

Various Applications of TEMPERSAFE

• Frameless or framed glass doors for both inside and outside buildings.
• Glass curtain walls requiring higher wind load resistance.
• Shower and tub enclosures, bathroom doors, showrooms, display windows requiring additional safety.
• Spandrel areas of buildings requiring resistance to rapid temperature change.
• Escalator handrails requiring high strength and safety.
• Squash courts requiring high impact load resistance.

 

Popular Edge Styles

Flat Edge with Arrise	: FA/B, FA/A, FA/AA
Bevel Edge	: BV/A, BV/AA
Pencil Edge	: PE/AA
O-Gee Edge	: OG/AA

PRODUCT AVAILABILITY
Glass Type	Thickness (mm)	Maximum Size (mm)	Weight (kg/m²)
Monolithic Tempersafe	3	1930 x 864	8
Monolithic Tempersafe	4	2438 x 1016	10
Monolithic Tempersafe	5	2438 x 1829	12
Monolithic Tempersafe	6	2438 x 4572	15
Monolithic Tempersafe	8	2438 x 4572	20
Monolithic Tempersafe	10	2438 x 7493	25
Monolithic Tempersafe	12	2438 x 7493	30
Monolithic Tempersafe	15	2438 x 7493	37
Monolithic Tempersafe	19	2438 x 7493	47
Heat Soaked Tempersafe	3-19	-	-

Recommendations for TEMPERSAFE

As TEMPERSAFE is thermally pre-stressed, hole drilling, grinding, cutting, and shaping must be done before the tempering process. Therefore please clearly specify all details concerning size, holes and edging style when ordering.